HPV Low Risk (6/11) TaqMan PCR Kit
HPV Low Risk (6/11) TaqMan PCR Kit
Register today to receive an exclusive 15% off* on your first order.
Supporting Data
Figure 1. Example of TaqMan PCR Positive result. Both PCR signals (FAM and Cy5) above the baseline from FAM, Cy5 and HEX channel indicate the successful PCR.
Figure 2. Example of TaqMan PCR Positive (Cy5) result. Both PCR signals above the baseline from Cy5 and HEX channel indicate the successful PCR.
Figure 3. Example of TaqMan PCR Positive (FAM) result. Both PCR signals above the baseline from FAM and HEX channel indicate the successful PCR.
Figure 4. Example of TaqMan PCR Negative result. No target DNA was detected in FAM and Cy5 channel but amplification signal from HEX indicates the successful PCR.
Figure 5. Example of TaqMan PCR inhibition result. No signal from FAM, Cy5 and HEX channel was detected. It is suggested to repeat the sample preparation using recommended kit for DNA purification
| Component |
Product # TM32350 (100 preps)
|
| MDx TaqMan 2X PCR Master Mix | 2 x 700 μL |
| HPV Low Risk (6/11) Primer & Probe Mix | 280 μL |
| HPV Low Risk (6/11) Positive Control | 150 μL |
| Nuclease-Free Water (Negative control) | 1.25 mL |
| Product Insert | 1 |
Storage Conditions and Product Stability
- All kit components should be stored at -20°C upon arrival.
- Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
- All kit components can be stored for 2 years after the date of production without showing any reduction in performance.