Plasma/Serum RNA/DNA Purification Mini Kit
For research use only and NOT intended for in vitro diagnostics.
Plasma/Serum RNA/DNA Purification Mini Kit
SKU
55200
Register today to receive an exclusive 15% off* on your first order.
Supporting Data
Kit Specifications
|
|
Minimum Plasma/Serum Input Volume
|
10 μL
|
Maximum Plasma/Serum Input Volume
|
200 μL
|
Size of RNA Purified |
All sizes including small RNA (<200 nt)
|
Size of DNA Purified |
≥ 50 bp
|
Minimum Elution Volume |
10 μL
|
Maximum Elution Volume | 25 μL |
Time to Complete 10 Purifications |
15-20 minutes
|
Average Yield |
Variable depending on specimen
|
Note: Do not exceed the recommended sample input volume of 200 µL.
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. It is recommended to warm Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed.
Component | Cat. 55200 (50 preps) |
---|---|
Lysis Buffer A | 30 mL |
Wash Solution A | 38 mL |
Solution WN | 18 mL |
Elution Solution A | 6 mL |
Elution Buffer B | 8 mL |
Micro Spin Columns | 50 |
Micro-Elute RNA Spin Columns | 50 |
Collection Tube | 100 |
Elution Tubes (1.7 mL) | 100 |
Product Insert | 1 |
Documentation
FAQs
Mini
A fixed speed centrifuge can be used, however reduced yields may be observed.
This may lead to the degradation of the isolated DNA/RNA or reduction in the total DNA/RNA yields.
All centrifugation steps are performed at room temperature. Centrifugation at 4°C will not adversely affect kit performance.
Yes, you can. To process less than 200 μL of Plasma/Serum, add Nuclease-free water to your sample to obtain a final volume of 200 μL and proceed with the procedure.
Adding less volume may reduce both the quality and the quantity of the purified DNA/RNA. Adding more may not affect the nucleic acid yields EXCEPT if more Elution Buffer B or Elution Solution A was added. Eluting your DNA/RNA in higher volumes will result in diluting your nucleic acids.
Your elution will be contaminated with the Wash Solution A. This may dilute the nucleic acid yield in
your first elution and may interfere with your downstream applications.
Yes, you can. A second elution is possible, but it is recommended that this elution is performed in a
smaller volume (25 μL).
Plasma/Serum samples contain very little Cell-Free Circulating DNA. This varies from individual to individual based on numerous variables. In order to increase the yield, the amount of Plasma/Serum input could be increased.
Plasma/Serum samples contain very little RNA. This varies from individual to individual based on numerous variables. In order to increase the yield, the amount of Plasma/Serum input could be increased.
If a different Elution Buffer or Elution Solution was used other than the one provided in the kit, the buffer should be checked for any components that may interfere with the application. Common components that are known to interfere are high salts (including EDTA), detergents and other denaturants. Check the compatibility of your Elution Buffer with the intended use.
Unlike other kits, Norgen's Plasma/Serum RNA/DNA Purification Mini Kit doesn't co-purify plasma/serum circulating RNA along with circulating DNA, therefore an RNase step is not required.
Most of the Free-Circulating Plasma/Serum RNA is short RNA fragments. The A260:280 ratio is normally between 1 – 1.6. This low A260:280 ratio will not affect any downstream application.